Skip to main content

Roof repairs · Carpenterstown, Dublin 15

Roof Felt and Valley Repair in Carpenterstown

A cracked tile hid holes in the roof felt at this Carpenterstown home. We patched the affected section, replaced the damaged tiles and waterproofed the valley alongside the planned dry verge installation and ridge cap repointing.

A roofer brushes grey waterproofing along a tiled roof valley beside a repointed ridge.
Applying Mariseal Detail to the repaired valley. The fresh ridge pointing and dry verge units are visible above it.

What needed attention

We were working on a neighbour’s roof in Carpenterstown when the homeowner asked us to fit dry verges and repoint the ridge caps on their tiled roof. During our usual check before starting, we spotted a cracked tile and damaged mortar along the valley, the channel that carries rainwater away where two roof slopes meet. When we lifted the cracked tile, we found holes in the felt beneath it. Roof felt, also called underlay, provides a second line of defence beneath the tiles. The damage was concentrated in one area and the rest of the felt was still serviceable, so a local repair made sense.

How we approached it

We lifted tiles around the damaged section, fitted new RoofTX Maxi underlay where the old felt had deteriorated, then replaced the damaged tiles. We also fitted dry verge units to cover the exposed tile ends at the roof edges and renewed the mortar joints around the ridge caps. At the valley, we cleared debris and removed the damaged mortar before renewing it. We finished the repaired valley with two coats of Mariseal Detail, a fibre-reinforced liquid waterproofing membrane.

The finished work

The homeowner got the roof-edge and ridge work they originally asked for, along with repairs to the damaged felt, tiles and valley. Keeping the felt repair to the affected section avoided the cost of stripping back the whole roof. Can roof felt be repaired in sections? A local patch can make sense when the damage is contained and there’s sound underlay around it to join onto. If the felt is brittle or torn across several areas, a roofer should assess whether a larger section needs renewing. Ask to see photographs of what was found under the tiles before deciding on the scope. “He kept us informed throughout the project and we would recommend him” — Kay, Google review.

The job, in photographs

From first look to finishing details

A jagged crack across the face of a roof tile.
01 / BeforeThe cracked tile we spotted during the initial roof check.
Loose pieces of mortar and moss along the valley beside the ridge end.
02 / BeforeDamaged mortar and debris in the roof valley before we cleared it.
Holes and torn edges in the old roof felt exposed between timber battens.
03 / Work in progressLifting the surrounding tiles revealed how far the felt had deteriorated.
New RoofTX Maxi underlay beneath the battens alongside the existing felt.
04 / Work in progressNew underlay fitted in the affected section before the tiles went back.
Dark dry verge units along the gable edges and fresh mortar around the ridge caps.
05 / Work in progressThe dry verges and ridge pointing in place while valley work was still underway.
A row of ridge caps with fresh mortar at the joints and along the tile edges.
06 / CompletedThe renewed mortar joints along the main ridge.
Two roof valley channels with a continuous grey coating where they meet at the ridge end.
07 / CompletedThe waterproofing finish at the junction of the two valleys.
Brown roof tiles with grey dry verge caps along the sloping edge above the white gutter.
08 / CompletedThe finished dry verge along the main roof edge, seen from ground level.
Close-up of overlapping grey dry verge caps covering the ends of the brown roof tiles.
09 / CompletedThe caps follow each row of tiles from the gutter to the ridge.
Grey dry verge caps running up the tiled gable beside a brick chimney.
10 / CompletedThe finished gable edge viewed from the other side.

Your roof, our next conversation

Planning similar work?

Tell us what needs attention. We’ll explain the next step and arrange a roof assessment.