Skip to main content

Roof repairs · Clonsilla, Dublin 15

Dry Verge Installation, Ridge Repointing & Valley Repairs in Clonsilla

A dry verge enquiry led to further repairs after our visual inspection revealed worn ridge pointing and debris in the valley. We showed the customer photographs of the findings, then fitted dry verge units, repointed the ridge caps and repaired the valley.

Grey dry verge units fitted along the main gable and smaller front gables of the Clonsilla home.
After: the main gable and front roof edges with the grey dry verge units fitted.

What needed attention

The customer initially contacted us to install dry verges at their home in Clonsilla, Dublin 15. When we arrived, we carried out a full visual inspection of the roof. The photographs show worn and missing mortar around the ridge caps, with moss, loose mortar and debris in the valley. We showed the customer photographs of what we had found and recommended ridge cap repointing and valley repairs alongside the original dry verge installation. This gave the customer a clear view of the areas needing attention.

How we approached it

We fitted grey dry verge units along the gable roof edges, covering the exposed tile ends on the main roof and smaller roof sections. We renewed the pointing around the ridge caps, including the joints and edges where the mortar had deteriorated. We cleared loose material and debris from the valley, prepared the affected area and applied Mariseal Detail liquid waterproofing along the valley detail. The photo sequence records the original condition, the preparation and the work as it progressed.

The finished work

The completed work brought together the original dry verge installation and the ridge and valley repairs identified during the visit. The roof edges now have a neat, continuous dry verge finish, the ridge caps have renewed pointing and the valley has been cleared and treated with Mariseal Detail. By showing the customer the inspection photographs before recommending the additional work, we made it clear why those repairs were needed and how they related to the original request.

The job, in photographs

From first look to finishing details

Main gable roof edge beside solar panels before dry verge installation.
01 / BeforeBefore: the main gable edge before the dry verge units were fitted.
Rear extension roof with exposed tile ends along the sloping verge.
02 / BeforeBefore: the rear extension verge, showing the original exposed tile ends.
Weathered ridge caps with gaps in the mortar at the joints and lower edges.
03 / BeforeInspection finding: worn pointing and open joints around the ridge caps.
Roof valley containing moss, debris and broken mortar beside the ridge junction.
04 / BeforeInspection finding: moss, loose mortar and debris in the valley beside the ridge junction.
Close view of the roof valley during preparation, with broken mortar and a power tool visible.
05 / Work in progressDuring: preparing the valley area and removing the deteriorated material.
Fresh mortar pointing beneath ridge caps and around their joints beside the roof valley.
06 / Work in progressDuring: renewed ridge pointing beside the valley before Mariseal Detail was applied.
Roofer brushing grey Mariseal Detail liquid waterproofing along the prepared valley between the tiled roof slopes.
07 / Work in progressDuring: applying Mariseal Detail liquid waterproofing to the prepared valley.
Grey dry verge units fitted along the main gable and smaller front gables of the Clonsilla home.
08 / CompletedAfter: the main gable and front roof edges with the grey dry verge units fitted.
Grey dry verge units along the rear extension roof edge, with the main gable visible above.
09 / CompletedAfter: the dry verge finish along the rear extension, viewed from the side.
Completed grey dry verge units covering the tile ends along the rear extension roof.
10 / CompletedAfter: a closer view of the finished dry verge along the rear extension.
Wide view of fresh pointing along the main ridge caps beside existing solar panels, with a roofer working near the valley.
11 / CompletedAfter repointing: a wider view of the renewed main ridge joints beside the solar panels. Valley work was still in progress when this photograph was taken.

Your roof, our next conversation

Planning similar work?

Tell us what needs attention. We’ll explain the next step and arrange a roof assessment.